Setting The Clock; Silent Or Audible Control Mode; Operating Oven Light; Changing The Temperature Display - Kenmore 790.42532310 Use & Care Gude

Oven Controls
Setting the Clock
When the appliance is first powered up or when the power sup-
ply to the appliance has been interrupted, 12:00 will flash in the
display. The time of day must first be set before operating the
oven. Most models will not work properly without first setting the
clock.
To set the clock:
1. Press CLOCK once. CLO appears in display.
2. Press A or V and the time appears in the display.
Continue to hold the Arrow key until the correct time of day
appears in the display.
3. Release the Arrow key to accept time of day.
Important note:
The time of day cannot be changed when the oven is in use.
Silent or Audible Control Mode
The oven control is factory preset with audible tones active. The
control may be programmed for silent operation.
To block the control from sounding when any key is pressed,
press and hold Delay Start key until the control beeps once
(about six seconds).
To return to the audible control mode, press and hold Delay
Start until the control beeps once (about six seconds).
Operating Oven Light
The oven light will automatically turn on when the oven door is
opened. The oven light does not operate during a self-clean
cycle.
Press the L) icon to turn the oven light on or off whenever the
oven door is closed. The oven light will not operate during a self
clean cycle.
The oven light is located at the upper right rear wall of the oven
interior and is covered with a glass shield held in place by
screws. The glass shield protects the bulb from high tempera-
tures and should always be in place when the oven is in use.
To replace the interior oven light, see page 26.
Changing the Temperature Display
The electronic oven control is set to display Fahrenheit (°F) when
shipped from the factory. The display may be changed to show
either Fahrenheit or Celsius (°C) oven temperatures.
To change temperature display mode from °F to °C or from °C
to °F:
1. Press Broil.
2. Press A until HI appears in the display.
3. Press and hold Broil until F or C appears in the display.
4. Press either A or V to toggle between F or C mode
choices and release the arrow key.
5. The display will sound an acceptance tone and the display
will return to the time of day.
Important note:
The temperature display mode cannot be changed when the
oven is in use.
Oven Lock
The OVEN LOCI( feature allows you to lock the oven portion of
the appliance while the oven is not in use.
To activate OVEN LOCK feature:
1.
2.
Be sure the door is completely closed.
Press and hold STOP for three seconds. Loc will appear in
the display. The DOOR LOCKED indicator light will flash
while the motor driven door latch begins locking the oven
door. Do not open the door during this time. Allow 15 sec-
onds for the door to completely lock. Once oven door is
locked, the time of day will appear in the display.
To cancel the OVEN LOCK feature:
Press and hold STOP for three seconds. The DOOR
LOCKED indicator light will flash and the motor driven door
latch will begin to unlock. Do not open the door at this time.
The door will unlock completely in about 15 seconds.
Important notes:
• The Oven Lock feature automatically activates while the
oven is in self clean and cannot be canceled without
canceling the self clean cycle.
• To avoid possible damage to the oven door latch
mechanism, do not attempt to open or close the oven door
whenever the DOOR LOCKED indicator light is flashing.
• If a control key is pressed when the OVEN LOCI( is active,
Loc will appear in the display as a reminder that the oven
keys are inactive when the OVEN LOCI( feature is active.
16