Download Print this page

Location Requirements - Whirlpool WRT111SFD User Instructions

Hide thumbs

Advertisement

NOTE: The refrigerator cabinet should not touch the floor
without a leveler installed.
A
A. Remove runner.
B. Install leveler.
Using the packaging corner posts (left-hand side, front
and back) as a cushion, lay the refrigerator down on the
floor (to your left-hand side only), as shown in the
following graphic.
NOTE: Using the packaging as a cushion will help avoid
denting or scratching the refrigerator.
Using a ³⁄₈" hex driver, remove the two screws attaching
each wooden runner to the bottom of the refrigerator.
Install a leveler to each of the front corners.
A
C
A. Remove runner.
B. Install leveler.
C. Packaging corner post
Clean Before Using
After you remove all of the package materials, clean the inside of
your refrigerator before using it. See the cleaning instructions in
"Refrigerator Care."
Important information to know about glass shelves
and covers:
Do not clean glass shelves or covers with warm water when
they are cold. Shelves and covers may break if exposed to
sudden temperature changes or impact, such as bumping.
Tempered glass is designed to shatter into many small,
pebble-size pieces. This is normal. Glass shelves and covers
are heavy. Use both hands when removing them to avoid
dropping.
4
B
OR
B

Location Requirements

Keep flammable materials and vapors, such as
gasoline, away from refrigerator.
Failure to do so can result in death, explosion, or fire.
IMPORTANT: This refrigerator is designed for indoor, household
use only.
To ensure proper ventilation for your refrigerator, allow ¹⁄₂"
(1.25 cm) of space on each side, and between the top of the
refrigerator and overhead cabinets. Allow 2" (5 cm) of space
behind the refrigerator. If your refrigerator has an ice maker, allow
extra space at the back for the water line connections. When
installing your refrigerator next to a fixed wall, leave a 3¹⁄₈" (8 cm)
minimum space on the hinge side to allow the door to swing
open.
NOTE: This refrigerator is intended for use in a location where the
temperature ranges from a minimum of 55°F (13°C) to a maximum
of 110°F (43°C). The preferred room temperature range for
optimum performance, which reduces electricity usage and
provides superior cooling, is between 60°F (15°C) and 90°F
(32°C). It is recommended that you do not install the refrigerator
near a heat source, such as an oven or radiator.
¹⁄₂" (1.25 cm)
www.goedekers.com
WARNING
Explosion Hazard
3¹⁄₈" (8 cm)

Advertisement

loading

  Related Manuals for Whirlpool WRT111SFD

This manual is also suitable for:

Wrt111sfdmss