MainTube Burner Conversion
Toolsrequired:
PhillipsHeadScrewdriver(+)
6 mm Nut Driver
Needlenosepliers
Steps=
1.
Remove the warming rack, cooking grids, and flame tamers.
2.
Remove the main tube burners by removing the pin securing the burners near the back wall of the firebox.
Gently lift the tube burners up and out.
3.
Use a 6 mm socket and wrench or 6 mm nut driver to remove the LP orifice from the end of each gas valve.
The NG orifice is located behind the LP orifice, so no additional orifice needs to be installed.
4.
Replace the tube burners and pins back into original position.
24