Printek Interceptor 800 Series Integrator's Manual page 10

7. This will open the Advanced Options:
Printer Configurable Features:
Top-of-Form Adjustment: (Default = No Adjustment)
Values: 0.50 in. higher to .050 in. lower
This setting is used in conjunction with the Start-of-Job Control and End-of-Page Control settings. If
one of those settings change from the default value, this setting can be used to fine tune the setting.
Print all Grays as Black?: (Default = No)
Values: No or Yes
If selecting "Yes" the Color Interpretation setting must be changed to Error Deffusion. Images will be
printed in black and white. No grayscale printing.
B and W Threshold / Halftone Density: (Default = 0 – Typical)
Values: -5 – Lighter to +5 – Darkest
This adjusts the contrast in your graphics printing.
Print Intensity: (Default = No Adjustment)
Values: 25% Lighter to 25% Darker
Adjusts the darkness of the print.
Start-of-Job Control: (Default = No Form Feed)
Values: Form Feed, No Form Feed, Feed 1 inch
Form Feed – when using a roll with black marks, the printer will advance paper to the black
mark before starting to print.*
No Form Feed – printer will start printing without advaning paper.
Feed 1 inch – when using a roll with black marks, the printer will advance to the black mark
then feed paper 1 inch before starting to print.*
* Top-of-Form setting can be used to further align the print to the top of the page.
6 www.printek.com | P: 888.211.3400 | F: 269.925.8539 | E: info@printek.com