Write-Protecting Discs; Loading And Unloading Discs - Sony PDW-U1 Operation Manual

Storage
• Do not store discs where they may be
subjected to direct sunlight, or in other
places where the temperature or humidity
is high.
• Do not leave cartridges where dust may
be able to gain ingress.
• Store cartridges in their cases.
Care of the discs
• Remove dust and dirt on the outside of a
cartridge using a soft dry cloth.
• If condensation forms, allow ample time
to dry before use.
3-4-3 Write-Protecting
Discs
To protect the content recorded on the disc
from accidental erasure, move the write-
protect tab on the lower surface of the disc
in the direction of the arrow, as shown in the
following figure.
Lower surface
of the disc
Write Inhibit
tab settings
SAVE
Recording
enabled
20 3-4 Handling Discs
Write Inhibit tab
Slide in the direction
of the arrow
SAVE
Recording
disabled
3-4-4 Loading and
Unloading Discs
To load and unload a disc, press 1 (power)
button to turn the unit on and light the
indicator, and follow the procedures
indicated in the next illustration.
To load
With the label
surface on the right,
insert the disc.
The disc is drawn in.
When a disc is loaded, the DISC IN
indicator lights.
a) Windows only
Note
The EJECT button is disabled when this
unit is connected to a Macintosh computer.
To eject a disc, see "To eject discs from a
remote computer" (page 29).
If the Macintosh does not recognize the
disc, eject the disc by using the eject icon in
the utility software of this unit.
DISC IN indicator
To unload
Press the EJECT
a)
button.