Engaging The Parking Brake - Craftsman 247.203710 Operator's Manual

Theenginewill automatically s hut off if the PTO (Blade Engage)lever is
movedintothe engaged (ON)positionwith the shift leverin Reverse.
Ignition Switch
Theignition switchisactivated to startthe engine.Insertkeyintothe ignition
switchandturn clockwise to the START p osition.Release the keyinto the ON
positiononceenginehasfired.SeeFigure 8.
Tostopthe engine,turn the ignition keycounterclockwise to the OFF position. S ee
Figure 8.
Neverleave a running machine unattended. Always disengage PTO,
move shift lever into neutral position, set parking brake, stop engine
land remove key to prevent un ntended start ng.
IMPORTANT: Prior t o operatingthe tractor,referto bothSafety InterlockSwitches
andStartingTheEngine inthe Operation sectionof thismanual f orfurther detailed
instructions.
On
Off
Start
Setting the Cutting Height
I. Select theheight p osition o fthecutting deck byplacing t hedeck lift lever i n
anyofthesixdifferent cuttingheight notches ontherightside ofthefender.
Keephands and feet away from the discharge opening of the cutting
deck.
Starting the Engine
Donot operatethe tractor if the interlock systemis malfunctioning. This
systemwasdesignedfor your safetyand protection.
NOTE: R efer t o the Gasoline andOilfill-up instructions earlierinthissection.
1. Insertthe tractorkeyintothe ignitionswitch.
2. Place the PTO (Blade Engage) l everinthe disengaged (OFF) position.
3. Engage the tractor'sparkingbrake.
4. Activatethe chokecontrolbymovingthe throttle/chokeleverall the wayup
intothe chokeposition.
5. Turnthe ignitionkeyclockwise to the START p osition. A fterthe enginestarts,
release the key.It will returnto the ON(orNormal M owing)position.
DoNOThold the key in the STARTpositionfor longer thanten
secondsat a time. Doingso may causedamageto yourengine's
electricstarter.
6. Afterthe enginestarts,deactivate the chokecontrolandplacethethrottle
controlinthe FAST p osition.
/VOTE: DoNOT leavethe chokecontrol o nwhileoperatingthe tractor.Doing sowill
resultina"rich"fuel mixtureandcause the engineto run poorly.
J
Figure 8
Engaging the Parking Brake
Toengage the parking brake:
I. Fullydepress t he clutch-brake pedalandhold it down withyourfoot.
2. Movethe speed controlleverall the waydown andinto the parkingbrake
position.
3. Release t he clutch-brake pedal t o allowthe parkingbraketo engage.
Toreleasethe parking brake:
I. Depress t he clutch-brake pedalandmovethe speed control l everout of the
parkingbrake positionandinto adesiredspeed.
14