Speed Control; Timer Mode - Kenmore 100.89308 Use & Care Manual

SPEEDCONTROL
The Speed Control Knob is !ocated on the
right side of the Mixer (with the front facing
you), and has increments from P, and has the
following settings: Pulse ( 1 ), Continuous
( 2 through 10 ), and OFF.
Always start the Mixer on the slowest possible
speed. When ingredients start to mix, turn
speed up as called for in recipe.
See Page cj for Speed Control Guide.
CAUTION:
When mixing is complete, turn Speed Control Knob to OFF
and unpbg Stand Mixer for safety.
MiXiNG ACTION
1. Make sure the Speed Control Knob is in the OFF position before plugging Mixer
into a proper 120V power outlet. The LCD Display Panel illuminates blue to show
the Mixer is plugged in.
2. The Control Panel Display will show all zeros, if the Speed Control Knob is at
any speed setting the LCD Display will flash E1 indicating an error. Turn the
Speed Control Knob OFF to resume.
3. When the Mixer is turned ON, a blue LED Light encircling the Speed Control Knob
comes on. A Work Light also comes on the illuminate the work area above the
bowl. Start with the slowest speed and work up. When ingredients start to mix,
turn speed up as called for in recipe. See Speed Control Guide, Page 9 •
USING THE COUNT-DOVVN TIMER MODE
The Count-Down Timer Mode is useful for any recipe that specifies a length of time
ingredients should be mixed. To set the Count-Down Timer, press the Timer Set /
Pause button. The LCD Display will flash all zeroes. Press the Min or Sec Button until
the desired mixing time is displayed. If you make a mistake, press and hold the
Pause button and the Timer is reset to zeroes. Once you have selected a time, turn
Mixer on with the Speed Control Knob and Timer will count down. Mixer will run the
set amount of time and then turn Off.