Maintenance - Bosch HMV5052U 800 series Use And Care Manual

Hide thumbs Also See for HMV5052U 800 series:
Table of Contents

Advertisement

Available languages

Available languages

Maintenance
Surface light replacement
CAUTION
To avoid risk of personal injury or property
damange, wear gloves when replacing the light
bulbs.
3. Pull the vent grill away from the unit.
t
1. Unplug the microwave oven or turn off power at the
main circuit breaker.
2. Remove the bulb cover mounting screws at both light
positions under the microwave.
4. Remove the screw at the front of the light cover and
carefully pull out the light cover.
3. Replace bulb with 30 watt appliance
bulb.
4. Replace bulb cover and mounting screw.
5. Plug the microwave back into the power supply or turn
the power back on at the main circuit breaker.
Oven light replacement
1. To replace light bulb, first disconnect
power to the
microwave oven at the circuit breaker panel or by
unplugging.
2. Remove the vent grill mounting screws.
5. Open light cover located behind filter mounting by
carefully pulling up on the front edge.
6. Remove old light bulb and replace only with equivalent
30 watt bulb available from parts distributor. Bulbs are
also available at most hardware stores or lighting
centers.
_¢:iiiiii
.................
Note:
DO NOT USE BULB LARGER THAN 30 WATTS.
22

Advertisement

Chapters

Table of Contents
loading

Table of Contents