Panel Lock; Settings - Bosch HMV5052U 800 series Use And Care Manual

Setting Sensor Cook
1. Touch Sensor Cook once. So- i and START are
blinking.
2. Touch Sensor Cook repeatedly until the desired
program number is shown in the display.
3. Touch Start/Enter to start sensor cook mode. SENS.
lights up in the display and the appliance starts
sensing.
When sensing is complete, two short beeps will sound
and the calculated cook time will start to count down.
Once sensor cook is finished 4 beeps will sound. The
appliance turns off and the clock is displayed.
Note: Do not open the door during the sensing
process, or the program will be cancelled. Once the
calculated cook time is displayed you can open the door
to stir, turn or rearrange the food. Touch Start/Enter to
resume operation.
Cancel operation
Touch Clear/Off to cancel the active oven mode. The
appliance turns off and the clock is displayed.
The cooling fans may continue to run for a while and then
switch off automatically.
Sensor Cook programs
Food Quantity Progr.
no.
c-l
S 7
C-C
_,
C-D
I'- II
DC - 7
Cooking tips
Baked 1 - 4 potatoes After cooking,
Potato (8 - 32 oz) allow to stand
wrapped in foil
for 5 minutes.
Sweet Potato 1 -4 potatoes After cooking,
(8 - 32 oz) allow to stand
wrapped in foil
for 5 minutes.
Fresh 8 - 24 oz No water is
Vegetable (0.5 - 1.5 Ibs) needed if vege-
tables have just
been washed.
Add
2 tablespoons
water per
8 ounces of
fresh vegeta-
bles.
Frozen 8 - 24 oz Add
Vegetable (0.5 - 1.5 Ibs) 1 tablespoon
water per
4 ounces of fro-
zen vegetables.
Progr. Food Quantity Cooking tips
no.
Sc - S Ground Meat 8- 24 oz After cooking,
(0.5 - 1.5 Ibs) allow to stand,
covered, for 3 -
4 minutes.
Sc - _ Fish/Seafood 8- 24 oz Roll thin edges
(0.5- 1.5 Ibs) underneath.
Arrange in a
ring around
microwaveable
dish.
S
c - "7 Brown Rice 0.5- 2 cups Use a high-
(dry rice) sided casserole
dish. Do not
cover. Use
1 cup rice to
3 cups water.
Sc - 8 White Rice 0.5 - 2 cups Use a high-
(dry rice) sided casserole
dish and lid.
Use 1 cup rice
to 2 cups water.
_c - _ Frozen Follow package
Entrees instructions for
venting, cutting
plastic film, etc.
Panel Lock
The panel lock feature is very useful when cleaning the
control panel. The lock will prevent accidental
programming when wiping the control panel clean.
To activate the panel lock:
Touch and hold Clear/Off for more than 3 seconds. The
symbol lights up in the display, a double beep
sounds.
To deactivate the panel lock:
Touch and hold Clear/Off for more than 3 seconds. The
symbol disappears from the display. The panel is
unlocked.
Settings
The following basic settings of your appliance can be
adjusted to your personal preferences.
Display Function Touch
Settings key
,
,7o Key sounds on/off once
1 - on
2 - off
r i
L _ o Clock display in stand-by twice
mode on/off
1 - on
2 - off
16