EnGenius EAP1200H User Manual page 14

Apple Mac OS X
1. Go to System Preferences (it can be opened in the
Applications folder or by electing it in the Apple Menu).
2. Select Network in the Internet & Network section.
3. Highlight Ethernet.
4. In Configure IPv4, select Manually.
5. Enter an IP address that is different from the EAP1200H
and Subnet mask, then click OK.
Note: Ensure that the IP address and Subnet mask are
on the same subnet as the device.
For example: EAP1200H IP address: 192.168.1.1
PC I P a ddress: 1 92.168.1.2 – 1 92.168.1.255
PC Subnet mask: 255.255.255.0
6. Click Apply when finished.
14