Advertisement
When the tool is not to be used for an extended period of time, lubricate the tool using pneumatic
tool oil and store the tool in a safe place. Avoid exposure to direct sunlight and/or a humid or hot
environment.
I
M
Maintenance of compressor, air set and air hose
After operation, always drain the compressor tank and the air filter. If moisture is allowed to enter the
tool, it may result in poor performance and possible tool failure.
1
Drain cock
Check regularly to see if there is sufficient pneu-
matic oil in the oiler of the air set. Failure
to
main-
tain sufficient lubrication will cause O-rings to
wear quickly.
, - A i r
filter
Oiler
Pneumatic oil
1
17
Advertisement
