Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Makita AN924
Summary of Contents for Makita AN924
- Page 1 Pneumatic Framing Nailer INSTRUCTION AN924 IMPORTANT:...
-
Page 2: Read Before Using
Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model: AN924 Air pressure 0.49 - 0.83 MPa (70 - 120 PSIG) Nail length (L) x Shank diameter (D) x Angle L: 50 mm - 90 mm x D: 2.9 mm - 3.76 mm x 21 degrees (L: 2″... - Page 3 operate if only the trigger is pulled or if only unintended discharge of a fastener will the contact element is pressed against the occur. wood. It must work only when both actions are keeping face and body parts away from performed.
-
Page 4: Parts Description
INSTALLATION periodical inspection of the tool. To maintain product SAFETY and RELIABILITY, maintenance and repairs should Selecting compressor be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. SAVE THESE INSTRUCTIONS. WARNING: MISUSE or failure to follow the safety rules stated in this instruction manual may cause serious personal injury. -
Page 5: Loading Nailer
Hook Loading nailer Selecting air hose CAUTION: Low air output of the compressor, or a long or smaller diameter air hose in relation to the nailing frequency may cause a decrease in the driving capability of the tool. FUNCTIONAL DESCRIPTION CAUTION: Before adjusting or checking function on the tool, always release the trigger... - Page 6 6 ENGLISH...
-
Page 7: Operation
azine end. Return the pusher lever. CAUTION: Do not put your finger on the rail of the pusher lever. Doing so may cause personal injury by the pusher lever swiftly returns to the firing opening. ► 1. Lock of the pusher lever Correct loading of the nails Connecting air hose CAUTION:... - Page 8 CAUTION: Always make sure that the actuation mode selector is properly set to the position for the desired nailing mode before nailing. Selecting the operation mode Contact actuation ► 1. Actuation mode selector Single sequential actuation mode: You can drive one nail by one sequential operation. Select this mode when driving a nail carefully and accurately.
-
Page 9: Maintenance
not use tool if the contact element or trigger sticks or binds. When the tool is not to be used for an extended period of time, lubricate the tool using pneumatic tool oil and store the tool in a safe place. Avoid exposure to direct sunlight and/or humid or hot environment. -
Page 10: Optional Accessories
OPTIONAL ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose. - Page 11 To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles. Makita Corporation 3-11-8, Sumiyoshi-cho, Anjo, Aichi 446-8502 Japan...