Section 8: Finger Print Management (Rts & Rts-Z) - Westinghouse RTS Series Installation And Operational Manual

Section 8: Finger Print Management (RTS & RTS-Z)
Overview:
User IDs 1-3 (and their associated fingerprints) are "Administrators."
complete access to program the RTS and to unlock the door at any time.
User IDs 4-7 (and their associated fingerprints) are "Managers." They have limited
access to program the RTS. Managers can delete User IDs, edit the Timed TUM menu,
and unlock the door at any time
User IDs 8-999 (and their associated fingerprints) are "General Users." They have
access to unlock the door at times set up by one of the Administrators.
and have no programming rights on the RTS.
After an administrator fingerprint has been enrolled, it must be verified by the lock
before the menu options can be accessed.
The term "fingerprint" is used as a general term to describe fingers or thumbs used for
enrollment/verification. Also, the term "finger" can refer to a finger or thumb.
Before enrolling and verifying fingerprints, please read the following helpful hints for
Fingerprint Enrollment and Verification:
Tips on Enrolling Fingerprints
 The center of the vortex (swirl) of the fingerprint pattern is the key data point. It
should be placed in the center of the sensor‟s glass window in a consistent way.
The fingerprint should be well defined with the peaks and valleys of the vortex
ridge pattern clearly visible.
 Light pressure when placing the finger or thumb on the scanner gives the best
image. The finger should be held flat and must not move during scanning.
 Adjust Fingerprint Sensitivity settings per Section 5.3
Note: "U-disk ok!" will display
after the USB drive is checked.
Data will then upload to the unit.
After upload is finished,
"Successful!" will display.
They have
General Users
Page 55