Yamaha FZ6RD(C) Owner's Manual page 36

INSTRUMENT AND CONTROL FUNCTIONS
4. Insert the projection on the front of
the rider seat into seat holder B as
shown.
2
4
1. Projection
2. Seat holder B (for high position)
5. Align the lower bolt holes in the rid-
er seat with the bolt holes in the
seat brackets, and then install the
bolts.
1
1. Bolt
6. Install the passenger seat.
To change the rider seat height to
the low position
1. Remove the passenger and rider
seats. (See page 4-14.)
2. Remove the rider seat height posi-
tion adjuster by removing the ad-
juster bolts.
3. Install the rider seat height position
adjuster so that its bolt holes
marked "L" are aligned with the
bolt holes of the adjuster brackets,
and then install the adjuster bolts.
4-16
2
1
1
1. Rider seat height position adjuster
2. "L" mark
3. Adjuster bracket
4. Insert the projection on the front of
the rider seat into seat holder A as
shown.
2
1. Projection
2. Seat holder A (for low position)
3
1