Rapid Deflation During Measurement; Function Of Memory; Memory Recall; Memory Clearance - scian LD-588 Instruction Manual

RAPID DEFLATION DURING MEASUREMENT

If you do not feel well during measurement or want to stop the
measurement for some reason, you can press the ' O/I 'button. The
device will quickly release the air in cuff and the device will be
returned to standby mode.

MEMORY RECALL

1.LD-588 can store 60 sets of readings each in 'M1' and 'M2', and will
automatically calculate the average value of the latest 3 readings for
'M1' and 'M2' respectively. When the memory is full (60 sets of
readings are stored), the oldest reading will be replaced by new one.
Memory will not clear away even if power supply is removed;
2.After a measurement is finished or when the device stands by, the
user can press button 'M1' or button 'M2' to recall memory. Press
button 'M1', the display will show the average value of the latest 3
readings as Fig.9;
Fig.9
3.Press again, the display will show '01', which means the latest
reading, then turns to another screen to show readings and measuring
time as Fig.10;
4.Press again, the display will show '02', which means the second to
the latest reading...

MEMORY CLEARANCE

After a measurement is finished or when the device
stands by, hold on button 'M1' or 'M2' for at least
5 seconds, the display will show 'Clr' which means
the stored reading for 'M1' or 'M2' is removed.

FUNCTION OF MEMORY

Fig.10
12
Fig.10