Related Manuals for scian LD-588
Summary of Contents for scian LD-588
- Page 1 UPPER ARM AUTOMATIC DIGITAL BLOOD PRESSURE MONITOR INSTRUCTION MANUAL Model: LD-588...
- Page 2 PARTS AND COMPONENTS 1.Main Body 2.Display 3.Air Connector 4.Tube Plug 5.Air Hose 6.Cuff 7.D-ring 8.AC Power Adaper (Optional) 9.Button ‘M1’ 10.Button ‘M2’ 11.Button ‘O/I’ 12.Batteries (Optional)
- Page 3 SYMBOLS Symbols Meaning Manufacturer Authorized Representative in the European community Symbol for the marking of electrical and electronics devices according to Directive 2002/96/EC. The device, accessories and the packaging have to be disposed of waste correctly at the end of the usage.
-
Page 4: Table Of Contents
TABLE OF CONTENT 1. GENERAL - PRINCIPLE OF OPERATION - NEW TECHNOLOGIES USED 2. TIPS ON TAKING BLOOD PRESSURE MEASUREMENT 3. BATTERY INSTALLATION 4. USE THE DEVICE WITH AC POWER ADAPTER 5. CORRECT POSTURE FOR MEASUREMENT 6. ASSEMBLY THE CUFF 7. -
Page 5: General
This instruction manual is intended to assist the user for safe and efficient operation of the automatic digital blood pressure monitor (hereinafter: device) model LD-588. The device must be used in accordance with the procedures described in the manual. It is import- ant to read and understand the entire manual, especially the section <Tips on taking blood pressure measurement>. -
Page 6: Tips On Taking Blood Pressure Measurement
TIPS ON TAKING BLOOD PRESSURE MEASUREMENT 1.It is necessary to know that arterial blood pressure is subjected to sharp fluctuations. The level of the arterial blood pressure depends on many factors. Generally arterial blood pressure is lower in summer and higher in winter. Arterial blood pressure changes with atmosphere pressure and is affected considerably by many factors, e.g. -
Page 7: Battery Installation
2.Take measurement under doctor’s instruction for patients with cardio-vascular diseases. Under no circumstances should you alter the dosages of any drugs prescribed by your doctor! 3.Accurate measurement of blood pressure may be difficult in serious arteriosclerosis, weak pulse, or in patients with obvious fluctuation of heart contraction rhythm. -
Page 8: Use The Device With Ac Power Adapter
Replace the batteries when the replacement indication “ ” appears in the display or nothing after ‘O/I’ button is pressed; The life-span of the batteries in this kit can be shorter than the alkaline batteries; Use R6,LR6 or AA alkaline batteries, do not use rechargeable batteries;... -
Page 9: Correct Posture For Measurement
CORRECT POSTURE FOR MEASUREMENT 1.Sit at the table and let the table support your arm as you take the measurement. Make sure that the cuff on the upper arm is at approxi- mately the same level as the heart, and that the forearm is extended naturally on the table;... - Page 10 4.Press the cuff to make sure that it is attached securely. The cuff should not be too tight or too loose. Two fingers should be easily put in between cuff and upper arm. 5.The mark <INDEX> on the cuff must point to area <NORMAL>...
-
Page 11: Setting The Date And Time
SETTING THE DATE AND TIME The function provides accurate measuring time for each measure- ment. To get accurate date and time, the user should preset the date and time correctly before the first use of this device. The operation procedure for presetting Date/Time is as follows: 1.When the device is connected to power on at first time, the display will show as Fig. -
Page 12: Automatic Inflation
Fig.4 Fig.5 Fig.6 3.The pump stop inflating and pressure begins to decrease gradually, during which the user’s blood pressure and pulse will be calculated as Fig.6; 4.There will be a long beep following the accomplishment of measure- ment. The air in the cuff will deflate quickly and the blood pressure reading, pulse reading will show in the display. -
Page 13: Rapid Deflation During Measurement
FUNCTION OF MEMORY MEMORY RECALL 1.LD-588 can store 60 sets of readings each in ‘M1’ and ‘M2’, and will automatically calculate the average value of the latest 3 readings for ‘M1’ and ‘M2’ respectively. When the memory is full (60 sets of readings are stored), the oldest reading will be replaced by new one. -
Page 14: Who Blood Pressure Classification Indication
WHO BLOOD PRESSURE CLASSIFICATION INDICATION Standards for assessment of high or low blood pressure, regardless of age, have been established by World Health Organization(WHO) as show in the chart as right: Optimal The indicator displays a segment, based on the current data, corresponding to the WHO classification. -
Page 15: Irregular Heartbeat Detector
IRREGULAR HEARTBEAT DETECTOR Model LD-588 digital blood pressure monitor provides a blood pressure and pulse rate measurement even when an irregular heartbeat occurs. When the device detects the irregular heartbeat or any excessive body movement during measurement, the ‘ ’ icon will display in the LCD. -
Page 16: Care, Storing, Repair And Recycling
CARE, STORING, REPAIR AND RECYCLING 1.It’s necessary to protect this device against high moisture, direct sunlight, shock,solvent, alcohol and gasoline. 2.Remove the batteries if the device is to be stored for a long time, and keep the batteries far from the children. 3.Keep the cuff from sharp subject and don’t extend or twist the cuff. -
Page 17: Troubleshooting
TROUBLESHOOTING SYMPTOM CHECK POINT REMEDY No display when the The batteries have run down Replace all the batteries device is connected to with new ones. power on The polarity of battery is Install the batteries correctly. wrong contact battery Clean the battery terminals compartment is polluted with dry cloth. -
Page 18: Specifications
SPECIFICATIONS Model LD-588 Size 127(L) ×99(W) ×50(H)mm Weight Approximately 255g without batteries Measuring method Oscillometry 40 to 260 mmHg (blood pressure) Measuring range 40 to 160 beats/minute (pulse rate) ± 3 mmHg for static pressure Measuring accuracy ± 5% of the reading for the pulse rate... -
Page 19: Blood Pressure Record
BLOOD PRESSURE RECORD SYSTOLIC DIASTOLIC PULSE DATE (mmHg) (mmHg) (beats/minute) - Page 20 BLOOD PRESSURE RECORD SYSTOLIC DIASTOLIC PULSE DATE (mmHg) (mmHg) (beats/minute)
-
Page 21: Manufacturer's Declaration
Guidance and manufacturer’s declaration – electromagnetic immunity The model LD-588 Digital Blood Pressure Monitor is intended for use in the electromagnetic environment specified below. The customer or the user of the model LD-588 Digital Blood Pressure Monitor should assure that is used in such an environment. - Page 22 Guidance and manufacturer’s declaration – electromagnetic immunity The model LD-588 Digital Blood Pressure Monitor is intended for use in the electromagnetic environment specified below. The customer or the user of the model LD-588 Digital Blood Pressure Monitor should assure that is used in such an environment.
- Page 23 Guidance and manufacturer’s declaration – electromagnetic immunity The model LD-588 Digital Blood Pressure Monitor is intended for use in the electromagnetic environment specified below. The customer or the user of the model LD-588 Digital Blood Pressure Monitor should assure that is used in such an environment.
- Page 24 To assess the electromagnetic environment due to fixed RF transmitters, an electromagnetic site survey should be considered. If the measured field strength in the location in which the Model LD-588 Digital Blood Pressure Monitor is used exceeds the applicable RF compliance level above, the Model LD-588 Digital Blood Pressure Monitor should be observed to verify normal operation.
- Page 25 Separation distance according to frequency of transmitter Rated maximum output power of 150 kHz to 80 80 MHz to 800 800 MHz to 2.5 transmitter ...
- Page 26 The manufacturer reserves the right to make technical changes without notice in the interest of progress. Prior notices will not be given in case of any amendments within this manual. The mentioned trademarks and names are owned by the corresponding companies. P588/1311/02...