Setting The Date And Time; Carry Out A Measurement - scian LD-588 Instruction Manual

The function provides accurate measuring time for each measure-
ment. To get accurate date and time, the user should preset the date
and time correctly before the first use of this device.
The operation procedure for presetting Date/Time is as follows:
1.When the device is connected to power on at first
time, the display will show as Fig. 1;
2.Press and hold button 'M1', then press button
O/I, and the year number flashes as Fig. 2;
3.Press button 'M1' or 'M2' to subtract or add the
number, and press button 'O/I' for confirmation;
4.When the year setup is finished, the month
number will flash automatically. Please follow the
same instruction as above to set month, date and
time;
5.Press button 'O/I' to finish setup as Fig. 3. If you
want to change the date and time, please repeat
procedure 2、3、4.
Annotation: When under the mode of Date/Time setting ,if without
any operation in 1 minute, the device will automatically return to
standby mode.
1.Insert the tube plug into the air connector.
Before the measurement, take 3~5 times deep breath and relax
yourself. Don't talk or move your arm;
2.Press button 'O/I', and all symbols will appear on display in 2
seconds as Fig.4. Then two short beeps will sound and '0' will appear
on the screen. Pump begins to inflate with display showing the reading
of pressure. Generally the pressure will reach 190 mmHg as Fig.5;

SETTING THE DATE AND TIME

CARRY OUT A MEASUREMENT

10
Fig. 1
Fig. 2
Fig. 3