Decode Attempt Duration - Symbol LS 9100 Product Reference Manual

Parameters

Decode Attempt Duration

This parameter sets the maximum time decode processing
continues during a scan attempt. It is programmable in 0.1
second increments from 0.1 to 9.9 seconds. (Setting this
between 1.0 and 3.0 seconds is recommended.)
Scan the bar code below to select a new time-on. Next scan two
bar codes from Numeric Bar Codes beginning on page 5-160. If
you make an error, or wish to change your selection, scan
CANCEL on page
5-170.
DECODE ATTEMPT DURATION
5-99