Color Adjust - ViewSonic VX500PLUS-1 Service Manual

display.
1.5 Method to enter/exit manual color alignment menu. Under factory mode, select color temp manual
near factory mode, select color temp manual item on factory OSD menu. It will display the following
color temperature adjust menu.
Use " UP" and "DOWN" to move cursor between item "9300", "6500", "5400" and "5000". Press
"2" to select which color temperature to be adjusted. It will show following menu.
Use "2" key to switch R, G, B, driver and "UP" or "DOWN" key to adjust the R. G. B value
corresponding to the selected item.
2. Color temperature alignment
Before manual adjust color temperature, set OSD contrast 80%, brightness 100% (factory default), enter into
factory mode and select "COLOR TEMP. MANUAL" item.
2.1 9300 alignment
2.1.1 Use "UP" or "DOWN" key to move cursor to 9300 color temperature, then press "2" key to
select 9300 color temperature adjustment.
2.1.2 Use "2" to move cursor to R-driver or G-driver or B-driver and then press "UP" or
"DOWN" key to adjust it to meet following chromaticity spec.
9300 K
ViewSonic Corporation

Color Adjust

9300K
6500K
5400K
5000K
User Color
1: Exit
9300K Color
Red
-
Green
-
Blue
-
-:
1: Exit
x = 0.283 0.030 , y = 0.298 0.030
2: Select
+:
2: Select
2
Y>= 160CD/M .
47
Confidential – Do Not Copy
+
+
+
VX500+-1