Datalogic PowerScan 7000 Quick Reference Manual page 10

Linear imager

Hide thumbs Also See for PowerScan 7000:

Table of Contents

USB Connection —

Connect the scanner to a USB port on the termi-

nal/PC using the correct USB cable for the interface type you ordered.

Reference

Figure 2

Figure 2. USB Connection

or...

Wand Emulation Connection —

Connect the scanner to the appro-

priate port on the terminal/PC using the correct cable for the interface

type you ordered. Reference

Figure 2

IBM Connection —

Connect the scanner to the IBM port on the ter-

minal/PC using the correct IBM cable. Reference

Figure 2

Keyboard Wedge Connection —

The Keyboard Wedge cable has a

'Y' connection from the scanner. Connect the female to the male end

from the keyboard and the remaining end at the keyboard port at the

terminal/PC. Reference

Figure 2

Programming

The scanner is typically factory-configured with a set of default features

standard to the interface type you ordered. You can select other options

and customize your scanner through use of the instructions and pro-

gramming bar codes available in the Product Reference Guide (PRG).

You can view and download this and other manuals from the website

listed on the back cover of this manual.

1-2

PowerScan

7000

Table of Contents

Show Quick Links

Table of Contents