Download  Print this page

Makita 6918FD Instruction Manual

Cordless impact wrench
Hide thumbs

Advertisement

Cordless Impact
Wrench
MODEL 6918FD
004403
I N S T R U C T I O N
M A N U A L
WARNING:
For your personal safety, READ and UNDERSTAND before using.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

Advertisement

loading

  Related Manuals for Makita 6918FD

  Summary of Contents for Makita 6918FD

  • Page 1 Cordless Impact Wrench MODEL 6918FD 004403 I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
  • Page 2: Specifications

    WARNING: Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. 6918FD M8 - M14 (5/16” - 9/16”) M6 - M12 (1/4” - 1/2”) 12.7mm (1/2”) 0 - 2,300/min.
  • Page 3 SAVE THESE INSTRUCTIONS Work Area 1. Keep your work area clean and well lit. Cluttered benches and dark areas invite acci- dents. 2. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
  • Page 4: Specific Safety Rules

    18. Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools with sharp cutting edge are less likely to bind and are easier to control. 19. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool’s operation.
  • Page 5 (1) battery charger, (2) battery, and (3) product using battery. 3. CAUTION - To reduce risk of injury, charge only MAKITA rechargeable batter- ies marked on the charger label. Other types of batteries may burst causing per- sonal injury and damage.
  • Page 6 b. That extension cord is properly wired and in good electrical condition; Table 1: RECOMMENDED MINIMUM AWG SIZE FOR EXTENSION CORDS FOR BATTERY CHARGERS Length of Cord (Feet) AWG Size of Cord 9. Do not operate charger with damaged cord or plug - replace them immediately. 10.
  • Page 7 7. Do not incinerate the Battery Cartridge even if it is severely damaged or is com- pletely worn out. The battery cartridge can explode in a fire. SAVE THESE INSTRUCTIONS 8. Be careful not to drop, shake or strike bat- tery.
  • Page 8: Functional Description

    FUNCTIONAL DESCRIPTION 004392 1. Button 2. Battery cartridge 004393 1. Battery cartridge 2. Charging light 3. Battery charger CAUTION: • Always be sure that the tool is switched off and the battery cartridge is removed before adjusting or checking function on the tool. Installing or removing battery cartridge •...
  • Page 9 NOTE: • The battery charger is for charging Makita battery cartridge. Never use it for other purposes or for other manufacturer’s batteries. • When you charge a new battery cartridge or a battery cartridge which has not been used for a long period of time, it may not accept a full charge.
  • Page 10: Electric Brake

    Release the switch trigger to stop. Electric brake This tool is equipped with an electric brake. If the tool consis- tently fails to quickly stop after switch trigger release, have tool serviced at a Makita service center. Lighting up the front lamp CAUTION: •...
  • Page 11: Operation

    ASSEMBLY 004371 1. Socket 2. Anvil OPERATION 002359 Standard bolt (ft lbs) (72) (9/16") (58) (9/16") (43) (1/2") (29) (1/2") (3/8") (14) (3/8") Fastening time CAUTION: • Always be sure that the tool is switched off and the battery cartridge is removed before carrying out any work on the tool.
  • Page 12: Maintenance

    002360 High tensile bolt (ft lbs) (87) (1/2") (72) (1/2") (3/8") (58) (43) (3/8") (5/16") (28) (5/16") (14) Fastening time MAINTENANCE • If the tool is operated continuously until the battery cartridge has discharged, allow the tool to rest for 15 minutes before proceeding with a fresh battery.
  • Page 13: Replacing Carbon Brushes

    Makita Authorized or Factory Service Centers, always using Makita replacement parts. Recycling the Battery The only way to dispose of a Makita battery is to recycle it. The law prohibits any other method of disposal. To recycle the battery: 1. Remove the battery from the tool.
  • Page 14 CAUTION: • These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose.
  • Page 15 Memo...
  • Page 16 Memo...
  • Page 17 Makita Canada Inc. 1950 Forbes Street, Whitby, Ontario L1N 7B7 Fold Stamp Timbre...
  • Page 18 Street Address City AGE: Under 19 Occupation: Dealer's Name & Address: Paste Paste Paste 3. How did you first learn of Makita Power Tools? Magazine/Newspaper From dealer Store display 4. Most favored points are? Design Features Size Price Model No.
  • Page 19 When you need service... • Explain the problem in a letter • Enclose the letter with the tool • Package carefully and send prepaid to the nearest Makita factory or authorized service centre (905) 571 - 2200 1-800-263-3734 (604) 272 - 3104 1-800-663-0909...
  • Page 20 WARRANTY. “The Makita Warranty is the only and the entire written warranty given by Makita for the Makita tools. No dealer or his agent or employee is authorized to extend or enlarge upon this warranty by any verbal or written statement or advertisement.”...