Do you have a question about the 247.203730 and is the answer not in the manual?
Questions and answers
Michael Thomas Mckenzie
April 13, 2025
How does the transmission drive belt run theough the pulleys
2 comments:
Mr. Anderson
April 13, 2025
The transmission drive belt on a Craftsman 247.203730 runs around the pulleys as shown in Figure 21 of the manual. To install it:
1. Ensure the belt remains routed correctly around the pulleys. 2. Pull the right side of the belt and place the narrow V side into the PTO pulley. 3. While holding the belt and pulley together, rotate the pulley to the left. 4. Continue rotating until the belt is fully rolled into the PTO pulley.
Special tools like an air or impact wrench may be needed, and several components must be removed.
This answer is automatically generated
Mr. Mckenzie
April 13, 2025
@Mr. Anderson thanks so much but that diagramn is showing the deck belt and my problem is the transmission drive belt that co tools the forward and reverse of the mower. Any ideas on that one?
Reginald Mason
March 21, 2025
What type of bagger/grass catcher will fit my Craftsman T1400, 42 inch (247.203730) riding mower
1 comments:
Mr. Anderson
May 14, 2025
The 8TEN TURFBUCKET Twin Bagger System (MPN: MK1012364) is compatible with the Craftsman T1400 42-inch riding mower (part number 247.203730).
Need help?
Do you have a question about the 247.203730 and is the answer not in the manual?
Questions and answers
How does the transmission drive belt run theough the pulleys
The transmission drive belt on a Craftsman 247.203730 runs around the pulleys as shown in Figure 21 of the manual. To install it:
1. Ensure the belt remains routed correctly around the pulleys.
2. Pull the right side of the belt and place the narrow V side into the PTO pulley.
3. While holding the belt and pulley together, rotate the pulley to the left.
4. Continue rotating until the belt is fully rolled into the PTO pulley.
Special tools like an air or impact wrench may be needed, and several components must be removed.
This answer is automatically generated
@Mr. Anderson thanks so much but that diagramn is showing the deck belt and my problem is the transmission drive belt that co tools the forward and reverse of the mower. Any ideas on that one?
What type of bagger/grass catcher will fit my Craftsman T1400, 42 inch (247.203730) riding mower
The 8TEN TURFBUCKET Twin Bagger System (MPN: MK1012364) is compatible with the Craftsman T1400 42-inch riding mower (part number 247.203730).
This answer is automatically generated