Camera Diagram; Mouse And Remote Diagrams - Night Owl F SERIES User Manual

6. RJ-45 (Ethernet) Port – RJ-45 port will be used to connect the DVR to your
router/modem via the included Ethernet cable. Keep in mind, you can quickly
network your DVR to begin viewing your cameras remotely right from your
mobile device by completing the DVR's Startup Wizard once you have
connected the DVR to your router and powered on the DVR.
7. USB Ports – USB ports allow for the connections of a USB mouse and /
or a USB flash drive. You will connect the included USB mouse to assist you
in navigating the DVRs menu interface. You will connect a USB flash drive to
download video files from the DVR and save them to your USB flash drive.
8. Alarm/RS-485 (PTZ) Port – Alarm/RS-485 port allows for PTZ camera
connection and integration with your monitored security company. Your
security company must configure the DVR, not Night Owl. (Alarm block on
16CH DVRs only)
9. Power Input – power input to connect the included 12V DC power supply.
10. Video Output – Allows you to connect the DVR to your TV / Monitor if your
TV / Monitor does not have a VGA or HDMI input.
11. IR-EXT – allows you to connect an IR extender which extends the IR signal
around corners, behind entertainment centers, or any situation where the
line-of-sight between your DVR and your remote control isn't possible. To use
it, connect the IR Extender to the IR-EXT input on the back of the DVR.
Put the other end of the IR Extender somewhere that allows a direct line of
sight between it and the remote.
12. On/Off – allows you to turn your DVR On or Off.

3.2.2 Camera Diagram

CAMERA
Images used are for reference only. Your product may slightly vary.
NOTE: Connect all cameras locally before final placement to ensure that all
components function properly.
14 F DVR Series Users Manual
3.2.3 Mouse and Remote Diagram
MOUSE
Live Viewing:
Double-click the left button on any camera view in split-screen mode to bring it to
full screen display.
Double-click again to return to split-screen mode.
Right-click to show the control bar at the bottom of the screen.
Right-clicking again will hide the control bar.
In Setup:
Left-click to make a selection.
Right-click to cancel setup or return to previous screen.
To Enter Values:
Move the cursor to a blank field and click the mouse. A virtual keyboard will
appear which supports numbers, letters and symbols. The Shift function will
access symbols in addition to upper case letters.
Chapter 3: Specifications 15