Installing And Removing The Vertical Stand - Lenovo ThinkCentre M53 User Manual

3. Remove the power cord from the ac power adapter cable loop at the rear of the computer and then
disconnect the ac power adapter from the computer.
Figure 10. Removing the ac power adapter

Installing and removing the vertical stand

Attention: Do not open your computer or attempt any repair before reading and understanding the "Read
this first: Important safety information" on page v.
Note: The vertical stand and VESA mount bracket are only available on some models. If your computer
comes with the VESA mount bracket installed, ensure that you remove the VESA mount bracket before
you install the vertical stand. To remove the VESA mount bracket, see "Installing and removing the VESA
mount bracket" on page 75.
To install the vertical stand, do the following:
1. Remove all media from the drives and turn off all attached devices and the computer. Then, disconnect
all power cords from electrical outlets and disconnect all cables that are connected to the computer.
.
Chapter 9 Installing or replacing hardware
73