Bios Levels; Using System Programs; Changing The Bios Settings Before Installing A New Operating System - Lenovo ThinkCentre M53 User Manual

BIOS levels

An incorrect level of BIOS can cause false errors and unnecessary FRU replacement. Use the following
information to determine the current level of BIOS installed in the computer, the latest BIOS available for the
computer, and where to obtain the latest level of BIOS.
• To determine the current Level of BIOS:
– Start the Setup Utility.
– Select Main menu.
• Sources for obtaining the latest level BIOS available
1. Lenovo support web site: http://www.lenovo.com/support/
2. Lenovo Customer Support Center
3. Levels 1 and 2 Support
To update the BIOS, see "Updating or recovering the BIOS" on page 38.
Note: BIOS settings vary by operating system. Change the BIOS settings before installing a new operating
system. See "Changing the BIOS settings before installing a new operating system" on page 39.

Using system programs

System programs are the basic layer of software built into your computer. System programs include the
POST, the BIOS, and the Setup Utility program. The POST is a set of tests and procedures that are
performed each time you turn on your computer. The BIOS is a layer of software that translates instructions
from other layers of software into electrical signals that the computer hardware can execute. You can use the
Setup Utility program to view or change the configuration settings of your computer. See "Using the Setup
Utility program" on page 33 for detailed information.
The system board of your computer has a module called electrically erasable programmable read-only
memory (EEPROM, also referred to as flash memory). It enables you to update the POST, the BIOS, and
the Setup Utility program easily. To perform such an update, you can either start your computer with a
system-program-update disc or run a special update program from your operating system.
Lenovo might make changes and enhancements to the POST and BIOS. When updates are released, they
are available as downloadable files on the Lenovo Web site at http://www.lenovo.com. Instructions for using
the POST and BIOS updates are available in a TXT file that is included with the update files. For most
models, you can download an update program that can be used to create a system-program-update disc
or be run from the operating system.

Changing the BIOS settings before installing a new operating system

BIOS settings vary by operating system. Change the BIOS settings before installing a new operating system.
To change the BIOS settings, do the following:
1. Start the Setup Utility program. See "Starting the Setup Utility program" on page 33.
2. From the Setup Utility program main menu, select Exit ➙ OS Optimized Default.
3. Depending on the operating system to be installed, do one of the following:
• To install the Windows 8.1 (64-bit) operating system, select Enabled.
• To install an operating system other than Windows 8.1 (64-bit), select Disabled.
4. Select Yes in the window displayed and press Enter to confirm your selection.
5. Press F10 to save changes and exit the Setup Utility program. See "Exiting the Setup Utility program"
on page 38.
.
Chapter 5 Advanced configuration
39