Installing Or Removing The Vertical Stand - Lenovo ThinkCentre M73 10DL User Manual

2. Remove the power cord from the ac power adapter cable loop at the rear of the computer and then
disconnect the ac power adapter from the computer.
Figure 8. Disconnecting the ac power adapter
What to do next:
• To work with another piece of hardware, go to the appropriate section.

Installing or removing the vertical stand

Attention:
Do not open your computer or attempt any repair before reading and understanding the "Important safety information"
on page v.
This section provides instructions on how to install or remove the vertical stand.
Note: The vertical stand and Video Electronics Standards Association (VESA
parts. If your computer comes with the VESA mount bracket installed, ensure that you remove the VESA
mount bracket before you install the vertical stand. To remove the VESA mount bracket, see "Installing or
removing the VESA mount bracket" on page 37.
®
) mount bracket are optional
.
Chapter 5 Installing or replacing hardware
35