Assembly - Makita N9514B Instruction Manual

ASSEMBLY

1
2
3
1. Lock nut
2. Depressed center wheel
3. Inner flange
1
1. Lock nut wrench
2. Wrench
3. Tighten
CAUTION:
• Always be sure that the tool is switched off and
unplugged before carrying out any work on the tool.
Installing side grip (handle)
001050
CAUTION:
• Always be sure that the side grip is installed securely
before operation.
Screw the side grip securely on the position of the tool as
shown in the figure.
Installing or removing depressed center grinding
001069
wheel/Multi-disc
WARNING:
• Always use supplied guard when depressed center
grinding wheel/Multi-disc is on tool. Wheel can shatter
during use and guard helps to reduce chances of
personal injury.
Screw the inner flange onto the spindle. Make sure that the
recessed side of the inner flange is placed next to the wheel.
Hold the spindle with the wrench so that it cannot revolve,
001081
then use the lock nut wrench to secure the inner flange. Fit
the wheel on the inner flange and screw the lock nut onto the
spindle.
To tighten the lock nut, hold the spindle with the wrench so
2
that it cannot revolve, then use the lock nut wrench and
securely tighten clockwise.
To remove the wheel, follow the installation procedure in
reverse.
7