17
Temperature inside
is too cold
Doors
can't
closed easily
Water drips on the
floor
The
light
working
Before Requesting Service
If the problem continues after taking the proper remedial actions, disconnect the
18
power cord plug from the wall outlet.
Transfer the items stpred in the fridge to a box or other container. Then contact the
dealer from whom you purchased this unit and be ready to provide information as
listed in "REQUIRED INFORMATION" below.
You are guaranteed with Hisense fridges. For detail, please see the Hisense
guarantee condition at page 1.
CAUTION
Required Information
Nature of malfunction
1
(as accurately as possible)
Product number
2
Serial number
3
Increase the temperature by following the "Display
controls" chapter.
Check whether the top of the refrigerator is tilted back
be
by 10-15mm to allow the doors to self close, or if
something inside is preventing the doors from closing.
The water pan (located at the rear bottom of the
cabinet) may not be properly leveled, or the draining
(
spout
located underneath the top of the compressor
)
m ay not be properly positioned to direct water
depot
into this pan, or the water spout is blocked. You may
need to pull the refrigerator away from the wall to check
the pan and spout.
●
The LED light may be damaged. Refer to replace
LED lights in cleaning and care chapter.
is
not
The control system has disabled the lights due to the
●
door being kept open too long, close and reopens the
door to reactivate the lights.
To prevent any electrical shock hazards, do not disconnect the power cord
plug from the wall outlet with wet hands.
(inscribed on badge)
Hisense Refrigerator
Customer's name, address,
4
phone number
Proof of purchase
5
Desired date for service visit
6