Toyota 2007 Camry Owner's Manual page 340

WWW.MANUALS.WS
The recommended connecting point
is in the above illustration.
Do not connect it to or near any part
that moves when the engine
cranked.
CAUTION
When making the connections,
avoid serious injury, do not lean over
the battery or accidentally let the
jumper cables or clamps touch any-
thing except the correct battery termi-
nals or the ground.
340
WWW.MANUALS.WS
'07Camry_U (L/O 0608)
5. Charge the discharged battery with the
jumper cables connected for approxi-
mately 5 minutes. At this time, run the
engine in the vehicle with the booster
battery at about 2000 rpm with the ac-
celerator pedal lightly depressed.
6. Start your engine in the normal way.
After starting, run it at about 2000 rpm
for several minutes with the accelerator
pedal lightly depressed.
7. Carefully disconnect the cables in the
exact reverse order: the negative cable
and then the positive cable.
8. Carefully dispose of the battery cover
cloths—they may now contain sulfuric
acid.
9. If removed, replace all the battery vent
is
plugs.
With smart key system—The engine may
not restart even after battery charging or
replacement. If this happens, see "(d)
Starting the engine after a battery dis-
to
charge" described below.
If the cause of your battery discharging is
not apparent (for example, lights left on),
you should have it checked at your Toyota
dealer.
If the first start attempt is not success-
ful...
Check that the clamp on the jumper
cables are tight. Recharge the discharged
battery with the jumper cables connected
for several minutes and restart your en-
gine in the normal way.
If the another attempt is not successful,
the battery may be depleted. Have it ch-
ecked at your Toyota dealer.
2007MY CAMRY from Oct. '06 Prod. (OM33748U)