Table of Contents
Advertisement
Making ice cubes
For the automatic ice cube maker to
operate it must be connected to the
domestic water supply.
Turning the ice cube maker on
^ Turn the freezing zone on
^ Open the ice cube drawer slightly.
^ Press the On/Off button a on the ice
cube maker. The indicator light will
come on.
^ Close the ice cube drawer.
Ice cubes can only be produced if
the ice cube drawer is completely
closed.
After the appliance is turned on for the
first time it can take up to 24 hours for
the first ice cubes to drop out of the ice
cube maker into the drawer.
After turning the ice maker on and off
again, this process takes a maximum of
6 hours.
34
Do not use the first three containers
full of ice cubes, as the water
will have been used to rinse through
the waterlines.
This also applies when making ice for
the first time after
not having used the appliance for a
while.
Making larger quantities of ice cubes
The amount of ice cubes which the
appliance makes depends on the
temperature in the freezer section. The
lower the temperature, the more ice
cubes are produced over a period of
time.
Ice cube production is halted
automatically as soon as the ice cube
container is full.
If you need a large amount of ice
cubes,
^ Exchange the full ice cube drawer
with the drawer on the right beside it.
As soon as the drawer is closed, the ice
cube maker starts again with
production.
Advertisement
Table of Contents
