Table of Contents
Advertisement
Mounting the top soft-close
mechanism:
^ Remove the cover a from the panel
b, turn it 180° and replace it on the
other side.
^ Hook the spacer on the handle side
into the retainer (A).
^ Hook the soft-close mechanism into
the retainer (B) on the appliance
side.
Push both parts outwards until they
engage.
Changing the door hinging
^ With screw c, attach the spacer and
the soft-close mechanism.
^ Hang the panel b on the shock
absorber arm d.
^ Push the cover e on from the side so
that the openings for the pinf are
on top of each other.
^ Pull the shock absorber arm d
towards the hinge bracket and insert
the pin f from the top so that the
square rests in the recess.
^ Then engage the cover e fully.
Take care that the cover e is seated
correctly to ensure that the door closes
properly and the pin is secured.
65
Advertisement
Table of Contents
