Maintenance; Replacing Carbon Brushes - Makita 9607BL Instruction Manual

MAINTENANCE
CAUTION
:
Always be sure that the tool is switched off and unplugged before attempting
to
perform
inspection or maintenance.
Replacing carbon brushes
Remove and check the carbon brushes
regularly. Replace when they wear down
to the limit mark. Keep the carbon brushes
clean and free to
slip
in the holders. Both
carbon brushes should be replaced
a t
the
Limit mark
same time. Use only identical carbon
brushes.
Use
a
screwdriver to remove the brush
holder caps. Take out the worn carbon
brushes, insert the new ones and secure
the brush holder caps.
To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or
adjustment should be performed by Makita Authorized or Factory Service Centers,
always using Makita replacement parts.
7