Table of Contents
Advertisement
Disc Grinder
96098
[
6,000
1
450
mm (47-314")
I
6.3
kg
(13.9
Ibs)
180 mm ( 7 " ) MODEL 9607BL
230
mm (9")
MODEL 9609B
INSTRUCTION MANUAL
518- 11 UNC
DOUBLE
INSULATION
SPECIFICATIONS
1
Overall length
1
Net weight
I
Spindle thread
MODEL
I
No load speed
(RPM)
9607BL
I
6,000
I
450 mm (1,7-314"1
I
6.0
kq
113.2 Ibsl
I
5/8-11 UNC
Advertisement
Table of Contents
Related Manuals for Makita 9607BL
Summary of Contents for Makita 9607BL
- Page 1 INSTRUCTION MANUAL SPECIFICATIONS No load speed MODEL (RPM) 9607BL 6,000 96098 6,000 Disc Grinder 180 mm ( 7 ” ) MODEL 9607BL mm (9”) Overall length Net weight 450 mm (1,7-314“1 mm (47-314”) MODEL 9609B DOUBLE INSULATION Spindle thread 113.2 Ibsl 5/8-11 UNC (13.9...
- Page 2 SAFETY INSTRUCTIONS WARNING: WHEN USING ELECTRIC TOOLS, BASIC SAFE- TY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, AND PER- SONAL INJURY, INCLUDING THE FOLLOWING: READ ALL INSTRUCTIONS. KEEP WORK AREA CLEAN. Cluttered areas and benches invite injuries. CONSIDER WORK AREA ENVIRONMENT.
- Page 3 14. REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking t o see that keys and adjusting wrenches are removed from tool before turning AVOID UNINTENTIONAL STARTING. Don't carry plugged-in tool with finger on switch. Be sure switch is OFF when plugging in. OUTDOOR USE EXTENSION CORDS.
- Page 4 ADDITIONAL SAFETY RULES Keep guards in place. Use only wheels having Load RPM” marked on the tool’s nameplate.,When using depressed center wheels, be sure t o use only fiberglass-reinforced wheels. Check the wheel carefully for cracks or damage before operation. Replace cracked or damaged wheel immediately.
- Page 5 Mount the inner flange onto the spindle. Fit the wheel over the inner flange and screw the lock nut onto the spindle. remove the wheel, follow the installation procedure in reverse. Lock nut Inner flange...
- Page 6 15' to the work- piece surface. During the break-in period with wheel, do not work the grinder in the B direction or will cut into the workpiece. Once the edge of the wheel has been...
- Page 7 To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. perform Limit mark...
- Page 8 ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use any other accessories or attachments might present accessories or attachments should be used only in the proper and intended manner.
- Page 9 Part No. 224517-1 Wire cup brush 180 (7") Lock nut wrench 28 Part No. 782412-6 (For 9609B) Part (mml Slze Grip 37 Part x 22 1 /8" 7/8") No 743027-41 Part Diameter 743207 2 4" 743206 A 743706 782413-4 (For 9607BL) 273480-5...
- Page 10 DISC GRINDER (7") Model 9607BL (9") Model 9609B Note: The switch and other part configurations may differ from country to country. Jan.-26-'90...
- Page 11 9607BL 96098 MODEL I T $ AiD DESCRIPTION MACHINE Pan Head Screw M6x16 IWith Washer1 Tool Rest Pan Head Screw M5x25 IWilh Washer1 Retaining Ring Compression Spring 7 Gear Housing 629LB Ball Bearing Flat Washer Spindle Lock Bush Retaining Ring S...
- Page 12 MAKITA LIMITED ONE YEAR WARRANTY Every Makita tool is thoroughly inspected and tested before leaving the factory. It is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase. Should any trouble develop during this one-year period, retum the COMPLETE tool, freight prepaid, to one of Makita’s Factory or Authorized Service Centers.