Download Table of Contents Print this page

Makita 9566CV 004051 Instruction Manual

150 mm (6”)
Hide thumbs Also See for 9566CV 004051:


Angle Grinder
150 mm (6")
For your personal safety, READ and UNDERSTAND before using.
w w w . m a k i t a t o o l s . c o m


Table of Contents

Summary of Contents for Makita 9566CV 004051

  • Page 1 Angle Grinder 150 mm (6”) MODEL 9566CV I N S T R U C T I O N WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. w w w . m a k i t a t o o l s . c o m...
  • Page 2: Specifications

    SPECIFICATIONS Model No load speed (RPM) Overall length Net weight Spindle thread • Manufacturer reserves the right to change specifications without notice. • Specifications may differ from country to country. GENERAL SAFETY RULES (For All Tools) WARNING: Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury.
  • Page 3: Personal Safety

    5. Avoid body contact with grounded sur- faces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is grounded. 6. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
  • Page 4: Specific Safety Rules

    Not More Than SPECIFIC SAFETY RULES DO NOT let comfort or familiarity with product (gained from repeated use) replace strict adherence to grinder safety rules. If you use this tool unsafely or incorrectly, you can suffer serious personal injury. 1. Always use proper guard with grinding wheel.
  • Page 5 12. Make sure cord is clear of wheel. Do not wrap cord around your arm or wrist. If control of tool is lost, cord may become wrapped around you and cause personal injury. 13. Make sure the wheel is not contacting the workpiece before the switch is turned on.
  • Page 6: Functional Description

    FUNCTIONAL DESCRIPTION 004052 1. Shaft lock 001035 1. Slide switch CAUTION: • Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. Shaft lock CAUTION: • Never actuate the shaft lock when the spindle is moving. The tool may be damaged.
  • Page 7 001046 1. Speed adjusting dial Number RPM (/min) 4,000 5,000 6,500 8,000 9,000 ASSEMBLY 004200 1. Wheel guard for cut-off wheel 2. Bearing box 3. Screw Speed adjusting dial The rotating speed can be changed by turning the speed adjusting dial to a given number setting from 1 to 5. Higher speed is obtained when the dial is turned in the direc- tion of number 5.
  • Page 8 004053 004054 1. Lock nut 2. Abrasive cut-off wheel 3. Spacer 4. Inner flange 5. Wheel guard for cut-off wheel 002980 1. Wheel guard 2. Bearing box 3. Screw 4. Lever Installing side grip (handle) CAUTION: • Always be sure that the side grip is installed securely before operation.
  • Page 9 002981 1. Screw 002982 1. Lock nut 2. Depressed center grinding wheel/ Multi-disc 3. Inner flange 4. Spindle 002390 1. Lock nut wrench 2. Shaft lock Loosen the lever on the wheel guard. Mount the wheel guard with the protrusion on the wheel guard band aligned with the notch on the bearing box.
  • Page 10: Operation

    This can cause loss of control and kickback. • NEVER use tool with wood cutting blades and other sawblades. Such blades when used on a grinder frequently kick and cause loss of control leading to personal injury. Operation with abrasive cut-off wheel WARNING: •...
  • Page 11 15 degrees to the workpiece surface. During the break-in period with a new wheel, do not work the grinder in the B direction or it will cut into the workpiece. Once the edge of the wheel has been rounded off by use, the wheel may be worked in both A and B direction.
  • Page 12: Maintenance

    CAUTION: • These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose.
  • Page 13 Depressed center grinding wheel / Multi-disc Sanding lock nut 5/8-48 Wheel guard (For cut-off wheel) 9566CV Grip 36 Wheel guard Inner flange 82 Lock nut 5/8-45 Rubber pad 125 Abrasive disc Wire wheel brush Wire cup brush Inner flange 48 Spacer Cut-off wheel Lock nut 5/8-48...
  • Page 14 Memo...
  • Page 15 Memo...
  • Page 16 Memo...
  • Page 17 First-Class Postage Required Post Office will not deliver without proper postage. Makita U.S.A., Inc. 14930 Northam Street La Mirada, CA 90638-5753 Fold...
  • Page 18 Paste 3. How did you learn about this product: Magazine From Dealer Newspaper Store Display Catalog 4. Most favored points are: Design Features Size Price Makita Brand MODEL NO. YEAR SERIAL NO. PHONE 20-29 30-39 40-49 Paste Paste Radio Exhibition...
  • Page 19: Factory Service Centers

    Date Purchased When you need service: Send complete tool (prepaid) to one Dealer’s Name & Address of the Makita Factory Service Centers listed, or to an Authorized Makita Service Center. Be sure to attach a letter to the outside of Model No.
  • Page 20: Warranty Policy

    MAKITA LIMITED ONE YEAR WARRANTY Warranty Policy Every Makita tool is thoroughly inspected and tested before leaving the factory. It is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase.

Table of Contents