Advertisement
Overload protector
The overload protector automatically cuts out to break the circuit whenever heavy work
is prolonged. If this occurs, first turn off the main switch and unplug the tool. Then de-
tach the hose and the inlet from the tool and remove the foreign matter clogging the fan.
Now attach the inlet and the hose and press the restart button.
CAUTION
:
Before pressing the restart button, always be sure to wait 20 seconds after the tool
stopped.
Operation
Avoid using the tool with the end of hose buried in a pile of dust, or the tool may be-
come clogged.
Emptying dust bag
Inspect the insides of the dust bag through
the window.
When the dust bag is about 213 (two thirds)
full, turn off the main switch and remove
the dust bag from the tool. Unzip the
fastener and empty the dust bag of i t s
contents, tapping
it
lightly
so as
to remove
particles adhering to the insides.
CAUTION
:
Empty the dust bag of
its
contents before
the dust bag is full, or the tool may be-
come clogged.
6
Advertisement
