Download Print this page

Additional Safety Rules - Makita 410 Instruction Manual

Makita dust collector user manual


Use extra care when cleaning on stairs.
15. Do not use t o pick up flammable or combustible liquids such as gasoline
or use in areas where they may be present.
16. EXTENSION CORDS: Use only three-wire extension cords which have three-
prong grounding-type plugs and three-pole receptacles which accept the
tool's plug. Replace or repair damaged or worn cord immediately.
17. OUTDOOR USE EXTENSION CORDS. When tool is used outdoors, use only
extension cords intended for use outdoors and so marked.
18. Connect to a properly grounded outlet only. See Grounding Instructions.
19. AVOID UNINTENTIONAL STARTING. Be sure switch is OFF when plugging in.
GUARD AGAINST ELECTRIC SHOCK. Prevent body contact with grounded
surfaces. For example; pipes, radiators, ranges, refrigerator enclosures.
VOLTAGE WARNING: Before connecting the tool to a power source (receptacle,
outlet, etc.) be sure the voltage supplied is the same as that specified on the
nameplate of the tool. A power source with voltage greater than that specified
for the tool can result in SERIOUS INJURY to the user
as well as damage t o
the tool. If in doubt, DO NOT PLUG IN THE TOOL. Using a power source with
voltage less than the nameplate rating is harmful to the motor.
1. Always use protective goggles, a cap and mask when using as a blower.
Never point the nozzle at anyone in the vicinity when using as a blower.
Do not block cooling vents. These vents permit cooling of the motor. Block-
age should be carefully avoided lest the motor burn out from lack of ventilation.
4. Do not fold, tug nor step on the hose.
5. Always switch off and wait for the fan to come to a complete stop before
Never stick your hands into the inlet or outlet.
installing or removing the hose.