Lap Belt Installation; Locking Latch Plate And No Retractor; Accessories (On Select Models); Reversible Body Pillow - Graco SNUGRIDE 30 Instruction Manual

Lap Belt Installation

Always review your vehicle owner's manual for specific
information about your vehicle seat belts.
Grab the sides of the seat at the belt
path and slide side to side and front
to back. The base or seat should
not move more than 1" (2.5 cm).
Grab the sides of the seat at the belt
path and slide side to side and front
to back. The base or seat should
not move more than 1" (2.5 cm).
64
Locking Latch Plate
and No Retractor
When installing the car
seat, route the lap seat
belt through the proper
path and buckle it in.
Then, pull upwards on
the tail of the belt so that
the lap belt gets tight
around the car seat.
Sewn On Latch Plate
and ALR Retractor
Slowly pull the lap belt
all the way out. Route
the vehicle seat lap belt
through the proper belt
path and buckle it in.
Then, pull the lap belt
tight while feeding all
the slack back into the
retractor.
7-A Accessories (on select models)
Reversible Body
Pillow
Body support must
be used if shoulders
are below the lowest
harness setting.
Never allow body
support to bunch or
fold behind child.
DO NOT USE the inside
waist strap slots. Those
slots are for use in the
stroller only. Using the
inside slots can result in
serious injury or death.
65