Graco SnugRide Classic Connect 35 Replacement Manual

www.gracobaby.com
To Remove Existing Harness Tongues and Buckle and Attach Replacement Buckle
1
To loosen straps, lift lever
and pull harness straps.
4
Remove chest clip.
DO NOT DISCARD
the chest clip.
7
Slide NEW buckle
onto harness straps.
MAKE sure not to
twist straps.
10
Re-insert straps back onto splitter plate.
See carseat owner's manual to choose
correct set of harness loops for your child.
SnugRide® Classic Connect™ 35
Buckle Replacement Guide
5
Unbuckle harness
red button, and
8
Re-attach chest clip.
MAKE sure not to
twist straps.
Remove harness
2
strap loops from
splitter plate.
6
by tilting top of
buckle down,
press top of
pull tongues
out of buckle.
9
Re-insert straps through slots
in seat pad and seat back.
See carseat owner's manual
for proper height setting for
your child.
Turn page over to
finish the rest of
the assembly
Steps 11 to 16
for the buckle
replacement.
©2014 Graco PD265292B 1/14
3
Pull harness straps
through seat back and
seat pad.
Remove and
discard tongues.