Graco SNUGRIDE 30 Instruction Manual page 23

8. To Change
Harness Height
Positions
From the back of
the car seat, pull the
harness straps out of
the harness locks.
9. Pull Harness
Straps Out From
the Front of Car
Seat
10. Insert Harness
Strap Into the
New Location
Make sure harness
straps are not twisted
and are at the same
height.
44
11. Thread Both
Harness Straps
Into Each Harness
Lock as Shown
Make sure harness
straps are not twisted.
Check that the straps
are secure by pulling on
the harness straps from
the front of the shell.
12. Secure Harness
Strap Ends
Place harness straps
ends through the
storage hooks as
shown.
45