Using The Accessories; Working With Detergents; Quick Connect Nozzles - Kärcher G 2600 VH Operator's Manual

Quick connect nozzles

The color-coded quick connect nozzles provide a
wide array of spray widths from 0° to 65° and are
easily accessible when placed in the convenient
nozzle holder.
0° spray angle = Red nozzle
For particularly stubborn accumulation of grime.
Not recommended for soft materials like sidings,
decks, painted surfaces, cars.
25° spray angle = Green nozzle
For dirt accumulation over a large surface.
40° spray angle = White nozzle
For moderate dirt accumulation over a large sur-
face.
Detergents can only be applied with the black
detergent nozzle.
STEP 1:
Install the black detergent nozzle for deter-
gent application (will work at low pressure
only).
STEP 2:
Fill the detergent tank with Kärcher detergent.
Close the detergent tank with the detergent
metering valve.
STEP 3:
Adjust the detergent metering valve to the de-
sired dosage
10
English

USING THE ACCESSORIES

WORKING WITH DETERGENTS

65° spray angle = Black detergent nozzle
For operating with detergent or cleaning with low
pressure.
WARNING
High pressure in nozzle area.
Risk of injury caused by improperly locked
nozzle.
Make sure you hear a 'click' when inserting
the nozzle tip into the wand.
Pull the nozzle to make sure it is seated prop-
erly before operating your unit.
(See ASSEMBLY INSTRUCTIONS: Step 9 )
WARNING
To avoid serious injury never point spray noz-
zle at yourself, other persons or animals.
STEP 4:
With the engine running, pull trigger to oper-
ate unit.
Liquid detergent is drawn into the unit and
mixed with water.
Apply detergent to work area.
Do not allow detergent to dry on surface.
STEP 5:
Always draw fresh water through the deter-
gent suction tube when the cleaning job is
done, to rinse/flush any remaining detergents
from the injection system.
For best results see Cleaning Tips for specific
information on how to clean different surfac-
es.