LG 55EC9300 Operating Manual page 51

10
EXTERNAL CONTROL DEVICE SETUP
Number
- 22 : Antenna TV (DTV) - Don't Use Physical
Channel Number
- 26 : Cable TV (CADTV) - Don't Use Physical
Channel Number
- 46 : Cable TV (CADTV) - Use Major Channel
Number Only (One Part Channel)
Two bytes are available for each major and minor
channel data, but usually the low byte is used alone
(high byte is 0).
* Tune Command Examples:
1. Tune to the Analog cable (NTSC) channel 35.
Set ID = All = 00
Data 00 = Channel Data is 35 = 23
Data 01 & 02 = No Major = 00 00
Data 03 & 04 = No Minor = 00 00
Data 05 = Analog Cable TV = 01
Total = ma O0 23 90 90 90 90 91
2. Tune to the digital antenna (ATSC) channel 30-3.
Set ID = All = 00
Data 00 = Don't know Physical = 00
Data 01 & 02 = Major is 30 = 00 1E
Data 03 & 04 = Minor is 3 = 00 03
Data 05 = Digital Antenna TV = 22
Total = ma 00 00 00 1E 00 03 22
Data 05 = Digital Antenna TV = 02
Total = ma 90 90 90 11 O0 01 02
2. Tune to the BS (ISDB-BS) channel 30.
Set ID = All = 00
Data 00 = Don't know Physical = 00
Data 01 & 02 = Major is 30 = 00 1E
Data 03 & 04 = Don't Care = 00 00
Data 05 = Digital BS TV = 07
Total = ma 90 00 90 1E O0 90 97
* This feature is varied based on the model.
21. Channel(Programme) Add/Dei(Skip)
(Command: m b)
_- To skip current channel(programme) for next time.
Data 00 : DeI(ATSC,ISDB)/Skip(DVB) 01 : Add
!i!i!i!i !! i i !ii iii iiii ii ii !ijiii !i i!i !ii!i i i ii i
For Japan Model
_- To tune channel to following physical/major/minor
number.
* Digital Antenna/Satellite
Data 00: xx (Don't care)
[Data 01][Data 02]: Major Channel Number
Data 01: High byte Channel Data
Data 02: Low byte Channel Data
- 00 01 ~ 27 OF (Decimal: 1 ~ 9999)
[Data 03][Data 04]: Minor/Branch Channel Number
(Don't care in Satellite)
Data 03: High byte Channel Data
Data 04: Low byte Channel Data
Data 05 : Input Source (Digital/Satellite for Japan)
- 02 : Antenna TV (DTV)
- 07 : BS (Broadcasting Satellite)
- 08 : CS1 (Communication Satellite 1)
- 09 : CS2 (Communication Satellite 2)
* Tune Command Examples:
1 Tune to the digital antenna (ISDB-T) channel 17-1.
Set ID = All = 00
Data 00 = Don't know Physical = 00
Data 01 & 02 = Major is 17 = 00 11
Data 03 & 04 = Minor/Branch is 1 = 00 01
* Set the saved channel status to deI(ATSC, ISDB)/
skip(DVB) or add.
22. Key (Command: m c)
_- To send IR remote key code.
Data Key code - p.2.
23. Control Backtight (Command: m g)
, For LCD TV / LED TV
_- To control the backlight.
Data Min : 00 to Max : 64
Control Panel Light (Command: m g)
For Plasma TV
_- To control the panel light.
Data Min : 00 to Max : 64