Black & Decker KR540 User Manual page 11

9…vyyvtÃ
Always apply a light pressure in a straight line
with the drill bit.
Just before the drill tip breaks through the
other side of the workpiece, decrease pressure
on the tool.
Use a block of wood to back up workpieces
that may splinter.
Use spade bits when drilling large diameter
holes in wood.
Use HSS drill bits when drilling in metal.
Use masonry bits when drilling in masonry.
Use a lubricant when drilling metals other
than cast iron and brass.
Make an indentation using a centre punch at
the centre of the hole to be drilled in order to
improve accuracy.
Tp…rq…v‰vtÃ
Always use the correct type and size of
screwdriver bit.
If screws are difficult to tighten, try applying
a small amount of washing liquid or soap as
a lubricant.
Always hold the tool and screwdriver bit in
a straight line with the screw.
H6DIU@I6I8@Ã
Your Black & Decker tool has been designed to
operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular
cleaning.
Before performing any maintenance,
switch off and unplug the tool.
Regularly clean the ventilation slots in your tool
using a soft brush or dry cloth.
Regularly clean the motor housing using a
damp cloth. Do not use any abrasive or
solvent-based cleaner.
Regularly open the chuck and tap it to remove
any dust from the interior.
QSPU@8UDIBÃUC@Ã@IWDSPIH@IUÃ
Should you find one day that your tool
needs replacement, or if it is of no further
use to you, think of the protection of the
environment. Black & Decker repair agents
will accept old Black & Decker tools and
ensure that they are disposed of in an
environmentally safe way.
English
UrpuvphyÃqh‡hÃ
Voltage
Power input
No-load speed
No-load impact
Chuck capacity
Max. drilling capacity
in steel/wood/concrete
Weight
Voltage
Power input
No-load speed
No-load impact
Chuck capacity
Max. drilling capacity
in steel/wood/concrete
Weight
BV6S6IU@@Ã
Should your Black & Decker product become
defective due to faulty materials or workmanship,
within 6 months from the date of purchase,
we guarantee to either replace all defective parts
or -at our discretion- to replace the unit free of
charge, provided that:
The product is returned to us or one of our
authorised repair agents with proof of
purchase.
The product has not been used for trade,
professional or hire purposes.
The product has not been subjected to misuse
or neglect.
The product has not sustained any damage
through foreign objects, substances or
accidents.
Repairs have not been attempted by anyone
other than our service staff or authorised repair
agents.
This guarantee is offered as an extra benefit and
does not affect your statutory rights.
11
KR540 KR550
V 230 230
AC
W 540 550
-1
min 0-2.800 0-2.800
-1
min 0-42.000 0-42.000
mm 13 13
mm 13/25/13 13/25/13
kg 1,8 1,8
KR572 KR600
V 230 230
AC
W 570 600
-1
min 2.500/3.000 0-3.000
-1
min 37.500/45.000 0-45.000
mm 13 13
mm 13/25/13 13/25/13
kg 1,8 1,8