To Purge; To Clean The Piercing Needle - Hamilton Beach FlexBrew 49965A User Instructions

How to Purge
NOTE: If you want to stop the
brew cycle at any time and
switch to a smaller cup size,
purge water from the unit.
How to Clean the Piercing Needle
1
If Needle is Clogged: The needle is located above the coffee drawer inside the unit. Remove coffee drawer. Bend a small paper clip as shown;
insert the tip of the paper clip through the hole/eye of the needle to ensure grounds have been removed. Replace coffee drawer and place a
large travel mug on cup rest. Brew 2 or 3 times with cold water.
1
Place mug on cup rest. Press
(ON/OFF) button.
2
2
3
When the coffee maker is purging,
the button will illuminate and
will turn off when the cycle is
complete.
4
9