Advertisement
Advertisement
Related Manuals for Smeg SBQ36X
Summary of Contents for Smeg SBQ36X
- Page 1 Instructions Manual SBQ36X – SBQ48X-1...
-
Page 2: Table Of Contents
INDEX RECOMMENDATIONS AND SUGGESTIONS ........................6 DIMENSIONS and MAIN PARTS ............................7 INSTALLATION ..................................8 USE ...................................... 11 CARE ....................................12... -
Page 3: Recommendations And Suggestions
RECOMMENDATIONS AND SUGGESTIONS The Instructions for Use apply to several versions of this appliance. Accordingly, you may find descriptions of individual features that do not apply to your specific appliance. INSTALLATION • The manufacturer will not be held liable for any damages resulting from incorrect or improper installation. -
Page 4: Dimensions And Main Parts
DIMENSIONS and MAIN PARTS... - Page 5 Components Ref. Q.ty Product Components Hood Body, complete with: Controls, Light, 7.2.1 Blower, Filters Telescopic Chimney comprising: (Optional) Upper Section (Optional) Lower Section (Optional) Damper (nr.2 only for 48” model) Metal ring (Option only for 48” model) Ref. Q.ty Installation Components 7.2.1 Upper Chimney Section Fixing Brackets (Op- tional)
-
Page 6: Installation
INSTALLATION Wall drilling and bracket fixing for Optional Chimney Telescopic 1÷ 2 7.2.1 7.2.1 313,5 313,5 833 - 1138 Wall marking: • Draw a vertical line on the supporting wall up to the ceiling, or as high as practical, at the center of the area in which the hood will be installed. - Page 7 Mounting the hood body • Adjust the two screws Vr of brackets 11a, by just placing them in position. • Hook the hood body to the two brackets 11a. • Remove the filters one at a time, supporting them with one hand and turning the safety knobs (pull and turn).
- Page 8 Vent and Electrical openings N.B. Install the Hood kit transition 150mm to 250mm 13 with 4 screws only for upper ducted version air (Optional not provided) only for 48” model.
- Page 9 ELECTRICAL CONNECTION • Connect the hood to the mains through a two-pole switch hav- ing a contact gap of at least 3 mm. • Remove the grease filters (see paragraph Maintenance) being sure that the connector of the feeding cable is correctly inserted in the socket placed on the side of the fan.
-
Page 10: Use
Control board The cooker hood can be operated as follows: LIGHT SWITCH L = controls the worktop illumination; MOTOR SWITCH M = controls the power to the motor and the fan speed: SPEED SWITCH V = controls the speed Position 1 = low speed, should be selected when simmering or using only one pan: the noise level is kept to the minimum. -
Page 11: Care
CARE Grease filters CLEANING METAL SELF- SUPPORTING GREASE FILTERS • The filters must be cleaned every 2 months of operation, or more frequently for particularly heavy usage, and can be washed in a dishwasher. • Remove the filters one at a time, supporting them with one hand and turning the safety knobs (pull and turn). - Page 12 436006008_05 - 140902...