Setting The Menu Language - Hasselblad H4D-200 MS User Manual

H4D
1
3
5
If an item on the menu is dimmed (for example, in fig. 4
"Camera" and "GPS" are dimmed), it signifies that the item is
not currently accessible.
2
4
6
N o t e
Getting started
The initial general setting is language choice. This choice is
retained but can be changed at any time. You can choose
between:
ENGLISH
GERMAN
FRENCH
ITALIAN
SPANISH
JAPANESE
CHINESE
Before each shoot an ISO and a white balance setting should
be made (white balance is for your convenience regarding the
appearance of the image on the display though; it will not affect
the raw file. See next chapter for details).
Although the description below illustrates how the language
choice is set, it is also a general introductory illustration of how
settings are changed.

Setting the menu language

Proceed as follows:
1. Press the MENU/EXIT (
2. Press the NAVIGATOR button ( and ) to select the
SETTINGS sub-menu.
3. Press the NAVIGATOR button () to open the SETTINGS
menu.
4. Press the NAVIGATOR button () to select the USER
INTERFACE sub-menu.
5. Press either ZOOM button (
guage (in this case, Spanish).
6. Press the MENU/EXIT (
If you find the sensor unit has been set to a language you don't
understand (a rented camera, for example), you can use the
procedure above to get back to your preferred language just by
following the actions and appearance in the illustrations here.
59
) button to open the menu.
+ –
or ) to choose a new lan-
) button again to close the menu.
T i p