Rs-232C/Lan Information Timing - Panasonic TH-42LF6W Operating Instructions Manual

Searching...
"Searching..." is displayed during the input search.
3ULPDU\ ,QSXW 6HFRQGDU\ ,QSXW
Set the input to search when "Priority" is selected.
(NONE) VIDEO Component/RGB
Note:
‡ This menu is available only when "Input lock" is "Off". (see page 51)

RS-232C/LAN Information Timing

Set up the informing manner for no signal or temperature rising.
While RS232C controls: Warning or error message sent on the display atuomatically.
While LAN controls: Acquire the warning or error message from the display.
Options
Off-timer function Enable
Normal
Initial Power Mode
ID select 0
Remote ID
Off
Serial ID Off
Serial Daisy Chain ---
Studio W/B Off
LAN Control Protocol
Protocol 1
RS-232C/LAN Information Timing
„ No Signal Warning
If set to "On", the display sends out the no signal warning.
„ No Signal Warning Timing
Set up the detecting time for no signal warning.
„ No Signal Error
If set to "On", the display sends out the no signal error.
„ No Signal Error Timing
Set up the detecting time for no signal
Note:
The "No Signal Error Timing" cannot be set shorter than "No Signal Warning Timing".
„ Temperature Warning
If set to "On", the display sends out the warning temperature.
„ Temperature Warning Value
Set up the detecting temperature for temperature warning.
„ Temperature Warning Release Value
Set up the temperature to release the temperature warning.
PC
2/3
Press ACTION ( ) button
.
DVI ',*,7$/ /,1.
RS-232C/LAN Information Timing
No Signal Warning
No Signal Warning Timing
No Signal Error
No Signal Error Timing
Temperature Warning
Temperature Warning Value
Temperature Warning Release Value
Options Adjustments
HDMI1 HDMI2
On
5min
On
10min
On
55°C
52°C
select
1
adjust
2
53