Napoleon LHD50N Installation And Operating Instructions Manual page 33

32"
813mm
60"
MINIMUM
1524mm
MINIMUM
ENCLOSURE
HEIGHT
TOP OF
APPLIANCE
28"
OPENING
711mm
MINIMUM
* Within the appliance enclosure a 6" (152mm) clearance between the top of the vent pipe and combustible
materials is required. All other clearances within the enclosure, including where the vent pipe exits the
enclosure are subject to 2" (51mm) to the sides and bottom and 3" (76mm) to the top for horizontal and 1"
(25mm) for vertical.
** See venting section.
COMBUSTIBLE
TOP OF ENCLOSURE
(COMBUSTIBLE)
6"
152mm *
STEEL STUD
FRAME
6"
152mm
NON-COMBUSTIBLE
0" IF NON-COMBUSTIBLE
3" FINISHING IS USED SUCH
76mm
AS BRICK AND STONE.
2"
51mm
51"
1295mm
MINIMUM
PLUS RISE**
33
EN
W415-0745 / F / 08.26.13