Advertisement
Main Switch
By rotating the Main Switch to the 'R' setting, all
circuits will be turned on and the camera will be
ready. When not using the camera, turn the Main
Switch off to avoid battery waste. The 'RL' set-
ting on the switch stands for running lock. This is
used for continuous and remote-control shoot-
,ing.
Manual Aperture Control Dial
Please leave this dial pushed in. If pulled out, the
camera will be switched to manual exposure
control.
Setting the Filming Speed
Normally, the camera is set at 18 fps. as this is
the
standard
speed for
Super
8 movies.
Changing the speed to 9 fps., is used to speed up
the subject's motion. This speed is also used to
compensate for under-exposure of a still subject
in dim light. Single frame shooting is used for
purposes like animation photography which is
single frame shooting that gives a feeling of
motion.
*
Concerning slow motion shooting, please refer
to page 42.
Advertisement
