Advertisement
Shooting
Press down the remote switch button to begin
advancing film. Slide the button forward to set
the remote switch for running lock, which will
provide continuous shooting even after your
finger has been withdrawn. If you want to check
exposure, pull the shutter lever, the same as run-
ning lock. Then the exposure indication in the
viewfinder lights up for you to read the exposure.
In manual aperture control shooting as well, the
exposure value can be checked the same as
above.
How toRelease
First, rotate the main switch to either 'R' or
'OFF', and unplug the Remote Switch. If you un-
plug the remote switch first, the shutter is
released and film will be wasted. Please follow
this sequence.
*
When remote control shooting is over, rotate
the main switch to 'OFF'. If you leave the switch
at 'RL', power consumption continues and short-
ens battery life. Therefore it is better to make the
settings just before shooting.
*
When you shoot from a distance, since you
cannot verify the situation through the vieWfind-
er, please check the subject condition well
Advertisement
