Do you have a question about the Canovision E850 Hi and is the answer not in the manual?
Questions and answers
danilo
April 18, 2025
come si fa ad accenderla? quale pulsante e' se non si accende **** il
trasformatore quale puo' essere il problema?
1 comments:
Mr. Anderson
May 9, 2025
To turn on the Canon Canovision E850 Hi:
1. Attach the battery pack by sliding it into the power source compartment. 2. Turn the camera on using the power switch.
If the camera does not power on, possible problems include:
- Battery is not properly attached. - Battery is discharged or faulty. - Battery polarity is reversed. - Power switch is not in the correct position. - Internal parts may require servicing (no user serviceable parts inside).
Refer servicing to qualified service personnel if the issue persists.
This answer is automatically generated
danilo
March 16, 2025
come si accende?
1 comments:
Mr. Anderson
March 16, 2025
To turn on the Canon Canovision E850 Hi, follow these steps:
1. Check the Power Source – Ensure the battery is charged and properly inserted or connect the camcorder to an AC power adapter.
2. Locate the Power Switch – Find the power switch, which is typically on the side or top of the camcorder.
3. Turn On the Camcorder – Slide or press the power switch to the "ON" position.
4. Verify Operation – Look at the viewfinder or display to confirm that the camcorder is powered on.
If the camcorder does not turn on, check the battery connection, try a different power source, or inspect for any damage.
Need help?
Do you have a question about the Canovision E850 Hi and is the answer not in the manual?
Questions and answers
come si fa ad accenderla? quale pulsante e' se non si accende **** il trasformatore quale puo' essere il problema?
To turn on the Canon Canovision E850 Hi:
1. Attach the battery pack by sliding it into the power source compartment.
2. Turn the camera on using the power switch.
If the camera does not power on, possible problems include:
- Battery is not properly attached.
- Battery is discharged or faulty.
- Battery polarity is reversed.
- Power switch is not in the correct position.
- Internal parts may require servicing (no user serviceable parts inside).
Refer servicing to qualified service personnel if the issue persists.
This answer is automatically generated
come si accende?
To turn on the Canon Canovision E850 Hi, follow these steps:
1. Check the Power Source – Ensure the battery is charged and properly inserted or connect the camcorder to an AC power adapter.
2. Locate the Power Switch – Find the power switch, which is typically on the side or top of the camcorder.
3. Turn On the Camcorder – Slide or press the power switch to the "ON" position.
4. Verify Operation – Look at the viewfinder or display to confirm that the camcorder is powered on.
If the camcorder does not turn on, check the battery connection, try a different power source, or inspect for any damage.
This answer is automatically generated